Junckers Rustic Oil-0.75L and 2.5L

Junckers Rustic Oil s an impregnating oil for indoor treatment for both priming and finishing of untreated wooden floors and table tops. It can also be used for maintaining other oil-treated surfaces. 

Coverage:

Oil-treated wood 20-50 square meters per litre. Untreated wood 5-10 square meters per litre.

Application:

Priming of untreated/sanded floors and table tops: Apply the oil and allow it to soak in for up to 30 minutes. If areas dry out faster, then apply more. Do not allow the surface to dry. After maximum 30 minutes wipe off the excess oil. Dried and unabsorbed oil leaves glossy spots on the surface. The surface should appear matt and even. Large areas should be divided into smaller areas 10-25 m2 . Leave the oil to dry 12-16 hours before the finishing treatment.

Finishing of primed wood: Apply the oil according to the level of absorption as described under "Priming of Untreated/sanded Floors and table tops". Remove surplus oil within 30 minutes with a dry soft cloth and buff the surface to an even finish using a clean cloth under the buffing pad. A buffing machine can be used as well. Repeat the treatment after 6-8 hours. The surface is ready for light traffic 24 hours after application of the last coat. Wait until the oil has obtained the full resistance before replacing rugs or carpets.

Please note-Check availability before ordering. Please either email us on info@doorsandfloors.co.uk or call us on 01603404080.

Please note- These are non-refundable/non-returnable